Category: Storage
·
Company Name: Piper Products
·
Style: Industrial
·
Address: Piper Products,
Incorporated
300 S. 84th Avenue
Wausau, WI 54401
300 S. 84th Avenue
Wausau, WI 54401
·
Telephone: 715-842-2724
·
Contact Person: Krystal Kleman
·
Products
information/model numbers: Enclosed Rack For Display: ER-18-L, ER-18-R
·
Special
remarks:
STANDARD FEATURES
STANDARD FEATURES
- Includes wider spacing between glides to eliminate possibility of slicing tops of rolls when sliding pans in and out - 3-1/4" spacing
- Units will hold 18 of the 18" x 26" standard sheet pans or 36 of the 18" x 13" half size sheet pans
- Side glides and bottom are removable for ease of cleaning, simply lift up and out
- Magnetic closure adjustable for tight fitting door
- Sturdy framed doors provide strength and attractive clarity
- Adjustable vent at top of unit to relieve excess heat
- Four 5" heavy-duty non-marking swivel casters, front include brakes
- Removable doors lift off for easy access during busy times
·
Category: Storage
·
Company Name: Channel Manufacturing Inc.
·
Style: Industrial
·
Address: Channel
Manufacturing, Inc.
55 Channel Drive
Port Washington, NY 11050
Telephone: 516.944.6271
55 Channel Drive
Port Washington, NY 11050
Telephone: 516.944.6271
·
Contact Person:
·
Email: sales@channelmfg.com
·
Products
information/model numbers:
Can Racks:
CSR-156 Stationary
CSR-156M Mobile
Can Racks:
CSR-156 Stationary
CSR-156M Mobile
·
Special
remarks:
Front loading, first in, first out (FIFO) can rack for can holding, storing and organization. Ideal for schools, hospitals, etc. Inclined angle provides easy access for can selection, rotation and inventory control. Holds 150+ cans
Heavy duty, high tensile, extruded all-welded aluminum. Type 6063-T5 alloy. Features a life time guarantee against rust. Shipped assembled for immediate use.
Sides are 1" x 2" extruded aluminum angle heli-arc welded to frame with the front edge rolled up to prevent cans from falling.
Front loading, first in, first out (FIFO) can rack for can holding, storing and organization. Ideal for schools, hospitals, etc. Inclined angle provides easy access for can selection, rotation and inventory control. Holds 150+ cans
Heavy duty, high tensile, extruded all-welded aluminum. Type 6063-T5 alloy. Features a life time guarantee against rust. Shipped assembled for immediate use.
Sides are 1" x 2" extruded aluminum angle heli-arc welded to frame with the front edge rolled up to prevent cans from falling.
·
Category: Storage
·
Company Name: Win-Holt Equipment
·
Style: Industrial
·
Address: Win-Holt Equipment
Group 141 Eileen Way, Syosset, NY 11791 / 93 Fox Hollow Road Woodbury, NY 11797
(Food Services)
Telephone: 516-921-1931
Telephone: 516-921-1931
·
Contact Person: Stuart Kresin
·
Products
information/model numbers: NHPL-1817-HP: Heater Proofers - Non-Insulated
·
Special
remarks:
·
Non-insulated
- Heavy duty aluminum construction.· Air baffle and circulating air blower provide even heat distribution.
· Higher wattage unit has quicker recovery time
· Proofing/Heating module with dual elements is 120VAC,16 AMP, cycle, 2000 watts.
· Removable chrome pan slides on 3” centers for easy cleaning.
· Clear door for easy viewing of product while retaining heating because doors are opened less. Door gasket prevents heat loss due to complete seal around the door. Field reversible door for right or left hanging standard. Magnetic door latch for keeping door closed during transport. Easy pull handle for opening.
· Easy to read LED thermometer.
· 17 pan slides hold a variety of pan configurations from sheet pans to steam table pans.
· Easy dual proof/heat control:
· “Proof” mode: Humidity from 30% to 95%.
· Temperatures up to 115°F (46°C)
· “Heat” mode: Nominal Temperatures up to 185°F (85°C)
· Drip trough catches condensation to reduce wet floor conditions. Internal water pan collects condensation or is used in proofer mode.
· 5" polyurethane plate casters standard with brakes for easy maneuverability.
No comments:
Post a Comment